EN10219 Welded (ERW) Pipe
1. Standard: EN10219
2. Specification for Cold Formed Welded structural hollow sections of non-alloy and fine grain steels
3.Grade: S235JRH, S275J0H,S275J2H,S355J0H,S355J2H, S355K2H
4. Type: Electric Resistance Welded(ERW)
Product name |
EN10219 ERW steet pipe with S235 |
Out Diameter |
21.3mm-610mm |
Wall Thickness |
0.8mm-14.27mm
|
Length |
6m-18m |
Standard |
EN10219 |
Quality grade |
First class, prime, newly produced, secondary , stock etc. |
Material/Steel grade |
S235JRH S275J0H S275J2H S355JOH S355J2H 355K2H |
Certificate |
EN10219 |
End |
Plain end, spigot & socket joint, beveled, cut square, flanged, piling shoes,etc. |
Surface |
Bare, varnished, black lacquer, Bitumen Coating, zinc coating, anti-corrosion coating, 3PE, FBE,Epoxy, Cement Mortar, as per customer’s requirement; |
Hydrostatic Test Range |
Max Length 18 meters; Max Diameter 610mm |
Test |
Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Metallographic Test, Technical Properties (Bending Test,Charpy-v Impact Test, Hydrostatic Test, X-ray Test, Ultrasonic Test) |
Packing |
Usually in loose pieces; can be packed as customers’ special requirements |
Application |
- applies to pipe piles in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in-place concrete piles; - predominantly used in the construction of chemical plant, vessels, pipe work and for general mechanical engineering purposes; - applies to structural hollow sections and pressure purposes etc. |
5. Size: NPS 1 TO NPS 24 [DN25 to DN 600], with nominal average wall thickness as given in ASME B 36.10M or as customers requirement.
6. Outer Diameter: 1-24 inches( 33.4¡ 609.6mm)
7. Thickness: 3-12mm
8. The sizes can be according to ANSI B36.10.
9. Length: Min 3 Meters, Max18 Meters, or according to customers requirement.
10.Ends: Small sizes are plain, Large sizes are beveled, or according to customer¡¯s requirement
11. Surface Treatment: Normally bare or black vanish, FBE/2PE/3PE Coated.
12. Packing: Small sizes below 219.1mm in bundles, Large sizes in bulk; If need, all the pipes can be covered in waterproof wrapping.
13. Testing: Cast analysis, Tendile test, Impact test for qualities J2 and K2, Surface condition and dimensions, NDT of the weld, Product analysis, and etc. As customers requirement.
上一篇:SEAMLESS STEEL PIPE - GOST9567-75,GOST8734-75,GOST10706-76