We are a leading manufacturer of Electric Resistance Welded (E.R.W.) steel Pipes are used for oil and gas processing and transmission lines.They are equally good in hot or wet applications such as river crossings and rough terrain. All our products are registered and assures consistent quality in its application.
API 5L ERW Steel Pipe for Line Pipe
1.OD:141.3-660mm
2.WT:3.2-22.2mm
3.Length:Max 12m
API 5L ERW Steel Pipe for Line Pipe
Outer Diameter | 141.3mm-----660mm |
Wall Thickness | 3.2mm----22.2mm |
Length | Max 12m |
Usage |
Line Pipe,Casing And Tubing,Fluid Pipe,Water Delievery, Heating Pipe,Power Pipe,Structure Pipe,Scaffold,Piling Pipe
|
Note – The Minimum elongation in 50.80mm shall be that determined by the following formula:
Where
e – minimum elongation in 50.80 min in percent rounded to the nearest half percent;
A – cross sectional area of tensile test specimen in square millimeters, based on specified outside diameter or nominal specimen width and specified wall thickness rounded to the nearest 6 sq. mm or 484 mm2 whichever is smaller; and
U – specified tensile strength, MPa
Technical Specification | |||||
N.B. mm | O.D. mm | Wall Thickness mm | Plain & Weight (Kg/m) | STD Test Pressure | |
(Min) 100 Kpa Grade 210 | (Min) 100 Kpa Grade 240 | ||||
65 | 73.0 |
3.20 3.60 4.00 4.40 4.80 5.20 5.50 |
5.51 6.16 6.81 7.44 8.07 8.69 9.16 |
- - 136 150 163 172 172 |
- - 158 172 172 172 172 |
80 | 88.90 |
3.20 3.60 4.00 4.40 4.80 5.50 |
6.76 7.57 8.37 9.17 9.95 11.31 |
89 112 123 134 154 |
104 117 130 143 156 172 |
90 | 101.60 |
3.60 4.00 4.40 4.80 5.70 6.40 7.10 |
8.70 9.63 10.55 11.46 13.48 15.02 16.55 |
88 98 108 117 139 156 174 |
102 114 125 137 162 182 193 |
100 | 114.30 |
3.60 4.00 4.80 5.20 5.60 6.00 6.40 7.10 |
9.83 10.88 12.96 13.99 15.01 16.02 17.03 18.77 |
78 87 104 113 122 130 139 154 |
91 101 121 132 142 152 162 180 |
125 | 141.30 |
3.20 4.00 4.80 5.60 6.60 7.10 |
10.90 13.94 16.16 18.74 21.92 23.50 |
56 70 84 98 116 125 |
65 82 98 115 135 145 |
150 | 168.30 |
3.60 4.00 4.80 5.20 5.60 6.40 7.10 |
14.62 16.21 19.35 20.91 22.47 25.55 28.22 |
53 59 71 77 83 94 105 |
62 76 81 89 96 110 122 |
200 | 219.1 |
4.80 5.60 6.40 7.00 |
25.37 29.48 33.57 36.61 |
54 63 73 79 |
63 74 84 92 |
250 | 273.1 |
4.80 5.60 6.40 7.10 7.80 8.70 9.30 |
31.76 36.94 42.09 6.57 1.03 56.72 60.50 |
44 51 58 65 71 79 85 |
51 59 68 75 83 92 98 |
300 | 323.90 |
4.80 5.60 6.40 7.10 7.90 8.40 8.70 9.50 |
37.77 43.96 50.11 55.47 61.56 65.35 67.62 73.65 |
37 43 49 54 61 64 67 73 |
43 50 57 63 71 75 78 85 |
350 | 355.60 |
4.80 5.20 6.40 7.10 7.90 8.70 9.50 |
41.52 44.93 55.11 61.02 67.74 74.42 81.08 |
34 36 45 50 55 61 66 |
390 42 52 58 64 71 77 |
Tolerances | |
a. Outside diameter Pipe body : | ± 1% |
b. Thickness 88.9 mm OD : 101.6 mm OD : & above : | +18% -12.5% + 15% - 12.5% |
c. Weight : Single Tube : Lot Wt : (Min. 18 M.T.) | + 10% - 3.5% - 1.75% |
d. Single random & Double random | 4 to 7 10 to 12 |
Grade of Pipe Min | Yield Strength Min | Tensile Strength Min | Elongation for Gauge Length Min |
MPa | MPa | See Note | |
Yst170 | 170 | 310 | |
Yst210 | 210 | 330 | |
Yst240 | 240 | 410 |