ASTM A519 steel pipe,1010, 1020, 1026, 1045, 4130, 4140

ASTM A519

 
seamless carbon and alloy steel mechanical tubing

 

Standard: ASTM A519

1. ASTM A519 seamless steel mechanical tube
2. Grade: 1020,1026,4140,4142,etc.

Standard: ASTM A519-06

Outside diameter:16mm~1016mm
Wall Thickness:2mm~120mm
Length:3m-14m,also can be manufactured according to customers' requirements
Type:Seamless(hot rolled and cold drawn) and hot expanding

Scope: Covers several grades of carbon and alloy steel seamless mechanical tubing. The grades are listed in Table-1. This specification covers both seamless hot-finished mechanical tubing and seamless cold-finished mechanical tubing.

Size Range: Covers tubes in size up to and including 12 3/4(323.8mm) outside diameter for round tubes with wall thicknesses as required.

Shape: The tubes shall be furnished in the following shapes, as specified by the purchaser: round, square,rectangular and special sections.


Chemical Composition& Mechanical Properties(Type: Cold Drawn Seamless Mechanical/CDS)

Grade C Mn P≤ S≤ Si Cr Mo
1008 ≤0.10 0.30-0.50 0.040 0.050 - - -
1010 0.08-0.13 0.30-0.60 0.040 0.050 - - -
1018 0.15-0.20 0.60-0.90 0.040 0.050 - - -
1020 0.18-0.23 0.30-0.60 0.040 0.050 - - -
1025 0.22-0.28 0.30-0.60 0.040 0.050 - - -
1035 0.32-0.38 0.60-0.90 0.040 0.050      
1045 0.43-0.50 0.60-0.90 0.040 0.050      
1026 0.22-0.28 0.60-0.90 0.040 0.050 - - -
4130 0.28-0.33 0.40-0.60 0.040 0.040 0.15-0.35 0.80-1.10 0.15-0.25

4140

0.38-0.43 0.75-1.00 0.040 0.040 0.15-0.35 0.80-1.10 0.15-0.25

 

Grade Condition Ultimate Strength Yield Strength Elongation Rockwell Hardness
Ksi Mpa Ksi Mpa % B scale
1020 HR 50 345 32 221 25 55
CW 70 483 60 414 5 75
SR 65 448 50 345 10 72
A 48 331 28 193 30 50
N 55 379 34 234 22 60
1025 HR 55 379 35 241 25 60
CW 75 517 65 448 5 80
SR 70 483 55 379 8 75
A 53 365 30 207 25 57
N 55 379 36 248 22 60
1035 HR 65 448 40 276 20 72
CW 85 586 75 517 5 88
SR 75 517 65 448 8 80
A 60 414 33 228 25 67
N 65 448 40 276 20 72
1045 HR 75 517 45 310 15 80
CW 90 621 80 552 5 90
SR 80 552 70 483 8 85
A 65 448 35 241 20 72
N 75 517 48 331 15 80
4130 HR 90 621 70 483 20 89
SR 105 724 85 586 10 95
A 75 517 55 379 30 81
N 90 621 60 414 20 89
4140 HR 120 855 90 310 15 100
SR 120 855 100 689 10 100
A 80 552 60 414 25 85
N 120 855 90 621 20 100

 

Please note the meaning of below abbreviation in table 2:
HR----Hot Rolled

CW----Cold Worked
SR----Stress Relieved

A----Annealed
N----Normalized 


steel pipe

carbon steel pipe

 Copyright (c)2012 New SindaIf you do not find the information you need, Click Here  Get Support

New Update Pipe List


    Spiral steel pipe forming with the internal stress relations Introduction: spiral steel pipe because of its manufacturing processes mature, low cost, fluid pipes using a steel pipe. Currently widely used continuous molding, the manufacture o.
    Transport fluid steel steel standards,Abstract works with various types of steel pipes often mix phenomenon in practical engineering. In this paper, the existing standard, and a brief analysis of the transmission fluid with steel pipe manufa.
    ASTM A53 B SCH40 ERW pipe.
Contact Us Online To Serve You Better

Hot Click PRO


      ASTM A519 Seamless steel pipe,Seamless Carbon and Alloy Steel Mechanical Tubing ASTM A519Size range: O.D.:6-320mm W.T.:1-50mm L:max12000mm.
      ASTM A213 PIPE: ASTM A213 / ASME SA-213/SA-213M seamless Ferritic and Austenitic Alloy-steel pipe/tube for boiler , Superheater and Heat-Exchanger..
      thick-walled tube, alloy tube, high pressure seamless pipe specifications.
      ASTM A519 gr 1045/CK45/C45 carbon seamless steel pipe,ASTM A-519 1020 1045 4130 4140 seamless pipe,S45C 1045 C45 seamless steel pipe.