ASTM A335/ASME SA335 Steel Grade: P5, P9, P11, P12, P22, P91, P92 .ASTM A335 Steel Grade P1, P2, P5, P9, P12, P11, P22, P91

alloy pipe

alloy pipe

 

    Alloy steel tubes is a kind of steel alloyed tube with other elements in amounts
of between 1 and 50% by weight to improve its mechanical properties.Alloying
elements are added to achieve certain properties in the material. As a guideline,
alloying elements are added in lower percentages (less than 5%) to increase
strength or harden ability or in larger percentages (over 5%) to achieve special
properties, such as corrosion resistance or extreme temperature stability.
 

Main Materials:

ASTM A335 (Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service)

ASTM A335 P1, P2, P5, P9, P12, P11, P22, P91


ASTM 213(Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes)
ASTM A213 T1, T2, T11, T5, T9, T22, T23, T91, T92

 

alloy steel pipe

ASTM A335 Seamless Ferritic Alloy Steel Pipe For High Temperature

Mechanical Properties
Grade Tensile strength(MPa) Yield strength(MPa) Elongation(%) Impact energy(J) Hardness
P11 ≥ 415 ≥ 205 ≥ 22 ≥ 35 ≤ 163HB
P12 ≥ 415 ≥ 220 ≥ 22 ≥ 35 ≤ 163HB
P22 ≥ 415 ≥ 205 ≥ 22 ≥ 35 ≤ 163HB
P5 ≥ 415 ≥ 205 ≥ 22 ≥ 35 ≤ 187HB
P91 585~760 ≥ 415 ≥ 20 ≥ 35 ≤ 250HB
P92 ≥ 620 ≥ 440 ≥ 20 ≥ 35 250HB
 

ASTM A335 Seamless Ferritic Alloy Steel Pipe For High Temperature

 

ASTM A213 ASME SA213 Alloy Steel pipe

ASTM A213 ASME SA213 chemical composition list

OTHER Materials:

ASTM A199 T9, T11, T22
ASTM A209 T1, T1A, T1B
ASTM A210 C
ASTM A250 T1
ASTM A369 FP1, FP2, FP12, FP22, FP9
ASTM A389 FP5
JIS G3455 STS49
JIS 3456 STPT49
JIS G3458 STPA12, STPA 22, STPA23, STPA24, STPA25, STPA26
JIS G3462 STBA12, 13, STBA20, STBA22, STBA23, STBA24, STBA25, STBA26
JIS G3464 STBL39
SEW610 10CrMo910
DIN 1629 St52.4, St52
DIN 17175 15Mo3, 13CrMo44, 12CrMo195
GB9948 16Mn, 15MnV, 16Mo, 12CrMo, 15CrMo, 12Cr1MOV, Cr2Mo, 10MoWVNB, Cr5Mo, Cr9Mo,
GB/T8162/8163 Q345, 20Cr, 40Cr, 20CrMo, 25CrMo, 30CrMo, 35CrMo, 34Mn2V, 42CrMo, WB36 (15NICUMOB5) and 12Cr2MoWVTiB(R102)
GB5310 12CrMoG, 15CrMoG, 12Cr1MoVG
GB/T 17396 27SiMn
GB18248 37Mn, 34Mn2V, 35CrMn, 34CrMo4
Type: Seamless and welded
Size:
Outer Diameter: 6mm~1420mm
Wall Thickness: 1mm~60mm

Length: 12m, 11.8m, 6m, 5.8m or as requirement.

alloy pipes

Alloy Steel Seamless Pipe,A. alloy pipe Allowable range of adjusting heat treatment temperatures listed in the table: Quenching ±20℃; low-temperature tempering ±30℃and high-temperature tempering ±30℃.

 Copyright (c)2012 LongtaidiIf you do not find the information you need, Click Here  Get Support

New Update Pipe List


    ASTM A519 gr 1045/CK45/C45 carbon seamless steel pipe,ASTM A-519 1020 1045 4130 4140 seamless pipe,S45C 1045 C45 seamless steel pipe.


    api SSAW large stock pipe,API 5L and ASTM LSAW/SSAW Steel Pipe.


    j55 pipe,j55 casing pipe,Steel grade: J55, K55, L80, N80, C95, P110 O. D. Range Tubing: From 2-3/8"to 4-1/2"(EUE/NU) Casing: From 4-1/2" to 20", .
Contact Us Online To Serve You Better

Hot Click PRO


      General knowledge of alloy steel pipe: introduction, chemical composition, heat treatment performance, melting equipment 1. Introduction to alloy steel pipe Alloy steel pipes have a hollow cross secti.
      ASTM A213 PIPE: ASTM A213 / ASME SA-213/SA-213M seamless Ferritic and Austenitic Alloy-steel pipe/tube for boiler , Superheater and Heat-Exchanger..
      thick-walled tube, alloy tube, high pressure seamless pipe specifications.
      42CrMo4 alloy steel pipe and chemical analysis,Carbon C: 0.38 ~ 0.45Si Si: ≤ 0.40Manganese Mn: 0.60 ~ 0.90.
      13CrMo44 high pressure boiler pipe,13CrMo44 alloy pipe ,13CrMo44, 42CrMo, 35CrMo, 10CrMo910.
      20Mn2 alloy steel pipe.
      Cr5Mo alloy Weight schedule steel pipe Cr5Mo alloy tube chemical composition Cr5Mo the alloy Management On Weight Table.
      15CrMo alloy steel pipe. 15crmo alloy steel pipe : steel Department of pearlite heat-resistant steel, high hot strength (δb ≥ 440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. .